-
December 15th, 2001, 09:00 PM
#1
Inactive Member
Hello all, another newbie here that needs some help on making a purchase that I may make soon. Here's the situation.....
I have a 95 Integra LS and I found a person that is selling a JRSC that has 5,000 miles on it. The person is selling the charger because he was in a wreck and totaled his Integra LS. He was able to get the following parts off of the vehicle, but said that I will need additional parts to complete the kit. Here's the list....
The kit uncludes:
SC
manifold
SC tensioner pulley
JR FPR/strap
hobbes pressure switch
3 bolts and phenolic spacers for fuel rail
4 bolts for SC/manifold mount
2 hex plugs for attaching blower
2 bolts for attaching throttle body
The parts missing are:
alternator pulley
upper/ lower alternator mount and tensioner
SC/ alternator support bracket
2 belts (should be replaced anyways)
heater, fuel and vacuum lines and hoses (these you would want to replace
anyways)
The asking price is $1300, Is it worth purchasing the kit like this if so, ant idea on how much they will cost? Thanks for any input.
------------------
-
December 15th, 2001, 09:19 PM
#2
Inactive Member
wayyy too much in my opinion.
------------------
It's powered by GASOLINE damnit!!!
-
December 15th, 2001, 11:10 PM
#3
Inactive Member
Mdls95,
I would suggest calling jr to find out how much they would charge to replace those parts. That will give you an idea how much it is going to cost overall. I am about to sell mine for 1600 with everything minus the belts and hoses. I just don't know what the hardware would cost, but it sounds expensive. If less than 300 I think it is a great deal.
------------------
1992 Red Honda Civic CX Hatch Back street car
B16a hybrid Drag Gen III turbo 9 psi - 12.215 @ 115.31 mph
formerly w/ jrsc 11psi w/b18c1 - 12.58 @ 110.5 mph
California Image Racing- Silver ALL MOTOR 90'CRX trailer queen
best 1320 - 11.55 @116.9 mph
Both powered by: SPEED PRO EFI
1998 Super Sonic Blue Integra GS-R (completely stock now)
With jrsc at 6psi best 1320: 13.78 @101.43
-
December 16th, 2001, 06:00 AM
#4
Inactive Member
Thanks gsrev, I will give JR a call Monday. I'll let you know the outcome.
------------------
-
December 17th, 2001, 03:32 AM
#5
Inactive Member
Check out my sig. It has pics of all the LS major parts minus the SC support bracket(bought from jr for 20$). 1150-1200$ would be a good base price. Check the blower make sure the blades spin freely, no oil leaks, etc.
------------------
1994 Integra RS
AEM CAI, Greddy EVO, CM Stage II clutch. and this : www.home.earthlink.net/~scand/PICTURES/JRSCkit/htmlpix.htm going on very soon!
[This message has been edited by Type Rs (edited December 16, 2001).]
-
December 17th, 2001, 05:50 AM
#6
Inactive Member
I had a complete inventory listing for the kit. Unfortunately, it did not have any prices but it had the part #'s. Just ask the guys at JR to email you one.
------------------
1994 Integra RS
AEM CAI, Greddy EVO, CM Stage II clutch. and this : www.home.earthlink.net/~scand/PICTURES/JRSCkit/htmlpix.htm going on very soon!
-
December 17th, 2001, 04:55 PM
#7
Inactive Member
Thanks Type Rs, Those pics will come in handy !!! Hopefully the additional parts wont be to expensive, we'll see after I all JR Monday.
------------------
-
December 17th, 2001, 08:03 PM
#8
Inactive Member
Thanks Guys for the help and direction. Boost will be on its way soon !!! I called JR and they emailed me the listing of parts for the supercharger.
The S/C supprt bracket kit - $20
Tension Assembly Upper - $151
Tension Assembly lower - $120
That puts me at close to $300 to complete the supercharger kit. Only question though, Should I go with the pulley suggested by JR or the CRV pulley?? I'm pretty happy with the prices though. I'll keep everyone posted. Thanks again.
------------------
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks